Installation
Air Conditioning Installation in Sydney
A system performs the way the brochure promises only when the install matches the engineering: the right capacity for the room, the outdoor unit positioned for airflow and service access, refrigerant lines sized and charged properly, and commissioning done rather than skipped. JED installs split, multi-head and ducted systems across the North Shore, the Northern Beaches and the Eastern Suburbs — sized on site, installed to the manufacturer’s specification, backed by a 10-year workmanship warranty.
Certified Daikin and Haier dealer. Quote back within 24 hours of the site visit.
- Daikin & Haier Certified Dealer
- 10-Year Workmanship Warranty
- Fully Licensed & Insured
- 25+ Years Experience Combined
Which system fits the home
Three ways to air condition a Sydney home. The house usually decides, not the brochure.
Split system
One room, a studio, an apartment, an extension.
A wall unit inside, a condenser outside, a short pipe run between them. Installed within a day. The right answer for a bedroom, a living room or an apartment where the strata allows one outdoor unit.
Split system installation →Multi-head split
Several rooms, no roof space.
One outdoor unit running two to five indoor heads. Terraces, top-floor apartments and homes with no ceiling cavity get room-by-room control without a condenser on every wall.
Multi-head systems →Ducted
The whole house, out of sight.
A single unit in the roof, outlets in every room, zoned so you condition the rooms in use. Needs roof space and a design done from the floor plan. Installed in one to two days.
Ducted air conditioning →Buying Daikin? The Daikin installation pagecovers series, sizing and what a certified dealer changes; theDaikin cost guide has indicative prices by size.
How a JED install runs
The same five steps on every job, from a bedroom split to a six-zone ducted system.
- 1
On-Site Assessment & Sizing
We assess room size, insulation, layout and usage to determine the correct system capacity.
- 2
System Recommendation
We recommend the right Daikin or Haier system based on performance, efficiency and budget.
- 3
Professional Installation
Installed to Australian standards and manufacturer guidelines.
- 4
Testing & Commissioning
Full system testing, airflow balancing and operational walkthrough.
- 5
Warranty & Aftercare
Backed by manufacturer warranty and workmanship guarantee.
What moves the price
Two quotes for “a 5 kW split” can be a thousand dollars apart and both be honest. This is what the difference usually is.
Capacity and series
A 2.5 kW bedroom unit and a 7 kW living-room unit are different machines; premium series cost more than standard ones.
Pipe run and position
A back-to-back install (indoor and outdoor unit on either side of the same wall) is the baseline. Long runs, roof-mounted condensers and brackets add labour and materials.
Electrical
Most splits run on an existing circuit; larger units and ducted systems need a dedicated circuit, and some switchboards need work first.
Roof space and zoning
Ducted pricing moves with the number of outlets and zones, the duct-run length and how easy the ceiling cavity is to work in.
Strata and heritage
Apartment installs need body-corporate approval; heritage streets restrict where the outdoor unit can go. Neither changes the equipment, both can change the position and the paperwork.
Access
Steep blocks, upper floors with no balcony and tight side passages take longer and sometimes need lifting gear.
What is included
- Site inspection and sizing from the room, not a rule of thumb
- Supply of the unit, brackets, pipework, drain and electrical connection
- Installation to the manufacturer’s specification and Australian standards
- Vacuum, pressure test, charge and full commissioning in every mode
- Manufacturer warranty registration and a walkthrough of the controls
- JED’s 10-year workmanship warranty on the installation
Where we install
Three regions, 116 suburbs, each with its own page on what changes the job there — salt air, strata, heritage frontages, roof space, bush blocks.
Installation FAQs
How long does an air conditioning installation take?
A standard split system is installed within a day. Ducted systems take one to two days depending on the floor plan and the number of outlets. Multi-head systems sit in between. We confirm the timing when we quote.
What size air conditioner do I need?
It depends on the room’s floor area, ceiling height, insulation, window area and orientation — not just the square metres. We size on site from those factors and the manufacturer’s selection data, which is why we inspect before we quote.
What does an installation cost?
Daikin wall splits start from $1,650 supplied and installed for a standard back-to-back install of a smaller unit; ducted systems start from roughly $9,000 for a single-storey home. Capacity, pipe runs, electrical work, zoning and access move the price, and the quote you get is the price you pay.
Which brands do you install?
We are certified dealers for Daikin and Haier and install both to the manufacturer’s specification. That matters for the warranty: an authorised dealer is accountable to the manufacturer for how the unit was fitted.
Do I need strata approval for an apartment install?
Almost always, because the outdoor unit touches common property. We supply the unit specifications, noise data and mounting details committees ask for, so the approval does not hold the job up.
What warranty do I get?
Two: the manufacturer’s warranty on the equipment, and JED’s 10-year workmanship warranty on the installation itself. They cover different things — the second one is what pays for a poorly brazed joint or a badly set condensate run, which equipment cover never does.
How soon can you install?
We inspect first and the quote comes back within 24 hours of the visit. Installation is then booked around your dates; split systems can usually go in within the week.
Get an installation quote
Tell us the property, the rooms and roughly what you have in mind. We inspect, size it on site and the quote is back within 24 hours.
- Trusted Local Experts
- Response within 24 hours
- 5-Star Rated
Get a Free Quote
Two quick taps, then your details — we’ll respond within 24 hours.
Contact Us Directly
We’re here to help- Call Us0434 308 070
- EmailJED_AIR@outlook.com
- Service AreaSydney-Wide Coverage
- HoursMon–Sat: 7am – 6pm
Why Get a Quote?
Quality you can count on- Free, no-obligation assessment
- Response within 24 hours
- Transparent upfront pricing
- 10-year workmanship warranty
- Daikin & Haier certified installations
Cooler spaces · Brighter lives
Areas We Service
Every one of the 116 suburbs below has its own page — drawn here from its gazetted boundary, across the Lower and Upper North Shore, the Northern Beaches and the Eastern Suburbs.
Tap or hover a suburb to zoom in; tap it again to open its page.
Browse all 116 suburbs as a list
Northern Beaches31
- Allambie Heights
- Avalon Beach
- Balgowlah
- Balgowlah Heights
- Beacon Hill
- Belrose
- Bilgola Plateau
- Brookvale
- Clontarf
- Collaroy
- Cromer
- Curl Curl
- Davidson
- Dee Why
- Fairlight
- Forestville
- Frenchs Forest
- Freshwater
- Manly
- Mona Vale
- Narrabeen
- Narraweena
- Newport
- North Curl Curl
- North Manly
- North Narrabeen
- Palm Beach
- Queenscliff
- Seaforth
- Terrey Hills
- Warriewood
Eastern Suburbs34
- Bellevue Hill
- Bondi
- Bondi Beach
- Bondi Junction
- Bronte
- Centennial Park
- Clovelly
- Coogee
- Daceyville
- Darling Point
- Double Bay
- Dover Heights
- Eastgardens
- Edgecliff
- Kensington
- Kingsford
- Little Bay
- Malabar
- Maroubra
- Matraville
- Moore Park
- North Bondi
- Paddington
- Point Piper
- Queens Park
- Randwick
- Rose Bay
- Rushcutters Bay
- South Coogee
- Tamarama
- Vaucluse
- Watsons Bay
- Waverley
- Woollahra



